BQDBP - P/N 4050 RED
- MSDS: BQDBP
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: P/N 4050 RED
- National Stock Number: 8010-01-294-2304
Product Identification
Product ID:P/N 4050 RED
MSDS Date:10/03/1991
FSC:8010
NIIN:01-294-2304
MSDS Number: BQDBP
Responsible Party
UNION, NJ 07083-0386
US
Emergency Phone: 713-682-1711
Info Phone: 713-682-1711
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
XYLENE (DIMETHYLBENZENE) (SARA III) (VAPOR PRESSURE 10.0 MM
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ISOBUTYL KETONE (SARA III) (VAPOR PRESSURE 15.0 MM
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TRICRESYL PHOSPHATE (TAR ACD, DRESYL, PHNYL, PHSPHA)
CAS: 1330-78-5
RTECS: TD0175000
Fraction By Weight: 1-5%
CUPROUS OXIDE (COPPER OXIDE [CU20]) (SARA III)
CAS: 1317-39-1
RTECS: GL8050000
Fraction By Weight: 70-75%
OSHA PEL 1.00 MG/M3
ACGIH TLV: 1.00 MG/M3
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITATION, REDNESS,
TEARING, BLURRED VISION. SKIN: IRRITATING, MAY RESULT IN
DERMATITIS. HARMFUL IF ABSORBED THROUGH SKIN. INHALATION: SEVERE
IRRITATION, DIZZINESS, POSSIBLE NAUSEA AND V OMITING AND
UNCONSCIOUSNESS. INGESTION:GASTROINTESTINAL IRRITATION, NAUSEA,
VOMITING, DIARRHEA AND UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES: FLUSH IMMEDIATELY W/WATER 15 MINUTES. GET MEDICAL
ATTENTION. IMMEDIATELY. SKIN: REMOVE CONTAMINATED CLOTHING, WASH
SKIN WITH PLENTY OF SOAP AND WATER. LAUNDER CLOTHES BEFORE REUSE.
INHALATION: R EMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
NEEDED. GET MEDICAL ATTENTION. INGESTION: GET MEDICAL ATTENTION
IMMEDIATELY. DRINK PROMPTLY MILK, EGG WHITES, GELATIN, SOL'N OR
WATER. AVOID ALCOHOL.
Fire Fighting
Flash Point:66.0F,18.9C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES. WATER MAY BE USED TO COOL
CNTNRS, NOT USED AS EXTINGUISHING MEDIA. PREVENT SPREAD OF BURNING
LIQUID W/WATER. CLOSED CNTNR MAY EXPLODE W/HEAT.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Handling
Handling and Storage Precautions:STORE IN BLDG DESIGNED & PROTECTED FOR
STORAGE OF LIQ W/NFPA CLASS I B FIRE.AVOID BREATHING DUST/CHIP FROM
SANDING/BLASTING SURFACES COATED W/PRODUCT.
Other Precautions:CHRONIC OVEREXPOSURE TO/MISUSE OF, SOLVENTS HAS BEEN
LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE. THIS MATERIAL
IS TOXIC TO FISH IF MISUSED, READ CONTAINER LABEL BEFORE USE.
Exposure Controls
Respiratory Protection:IN OUTDOOR OR OPEN AREA WITH UNRESTICTED
VENTILATION, USE NIOSH FILTER RESPIRATOR (REMOVE SOLID AIRBORNE
PARTICLES). IN RESTRICTED VENT AREAS, USE NIOSH RSPRTR IN ACCORD
W/29 CFR 1910.134 (REMOVE COMB INATION PARTICULATES & VAPORS).
Ventilation:PROVIDE VENT (VOL/PATTRN) TO KEEP TLV & LEL BELOW LIMITS
SPECIFIED & TO REMOVE DECOMP PRODUCTS DURING WELD/FLAME CUT.
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES
Eye Protection:SFTY GLASSES, CHEM GOGGLES, FACE SHIELD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:241 TO 466F
Vapor Density:> AIR
Spec Gravity:19.9 LBS/GAL
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:13
Stability
Stability Indicator/Materials to Avoid:YES
MOISTURE, OXIDIZING AGENTS
Stability Condition to Avoid:KEEP DRY. KEEP FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, COPPER FUMES
Conditions to Avoid Polymerization:KEEP DRY, KEEP FROM DIRECT HEAT,
FLAME OR SPARK.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE &
LOCAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.